Call Us Today! 877.742.2583




FreeSWITCH
Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

About

This is the home page of the sections that describe installing and performing basic testing of FreeSWITCH™ and its prerequisites on OS X. 


Introduction

If you have not read the Mac OS X page please view it now.

Warnings About Upgraded Systems

Upgraded OS X Systems

 

Upgraded OS X or Xcode ?

All testing for these instructions was performed on a clean/non-upgraded OS X and Xcode system, without issues. Most upgraded OS X or Xcode systems will work depending on the level of the oldest software. Some upgraded systems had problems due to old files left in different directories. 

If there are problems installing prerequisites check if the OS X release was upgraded, for instance from 10.7 or 10.8 to a newer system. The older the original system the more likely problems will occur.

Also check if Xcode was upgraded, for instance from Xcode 4 or 5 to a newer Xcode. The older the original Xcode the more likely problems will occur.

In some cases older upgraded systems had issues due to old parts of a prior OS X or Xcode still intact. In these cases a fresh OS X and Xcode install may required.


Upgraded Xcode

Prerequisites Previously Installed Differently?

If prerequisites were previously installed using different methods and there are problems, you should build OS X from scratch. In tests, using Homebrew or the script below worked every time on freshly installed OS X systems.

 

Installation

The OS X FreeSWITCH™ Installer

If the OS X system is 10.9 or later, consider using the OS X FreeSWITCH™ Installer. It automates most of the steps in the release instructions below and saves a lot of time! Check it out at Installation on OS X using AppleScript.

Select OS X Release

To manually install FreeSWITCH™ on OS X, click a link below to view instructions. The pages link back here to continue.

 

                                      FreeSWITCH™ OS X Release Status

ReleaseTestedInstallation Wiki Page
  10.11.0 El Capitan  October 3, 2015  Installation on OS X 10.11 El Capitan
  10.10.5 Yosemite  October 3, 2015  

Installation on OS X 10.10 Yosemite 

  10.9.5 Mavericks  October 3, 2015  Installation on OS X 10.9 Mavericks
  Mac OS X Archive Mac OS X Archive 

xxx 

Installation is Complete

This section is used to allow the previous pages to return to this location. Do not remove this section.

 

Test FreeSWITCH™!

Startup From the Command Line

The time has come to start FreeSWITCH™ in a Terminal window:

  cd /usr/local/freeswitch/bin
  ./freeswitch

There are many startup messages ending with some text boxes containing the names of the developers.

Test the FreeSWITCH™ Command Prompt

After all startup messages are displayed a command prompt appears, messages may continue as the prompt remains. Try a few FreeSWITCH™ commands:

  version
  status
  sofia status

If the commands return responses FreeSWITCH™ is working and you can continue with the next step.

Test A Phone

Test using a physical SIP phone or soft phone such as Bria, or search the OS X App Store for "SIP" for a free download of Telephone. Setup the phone using the IP address of the Mac FreeSWITCH™ is running on. The port is 5060, user IDs 1000-1019 with a password of 1234 are pre-configured. Additional information is at Test Calls. Test as many functions as you can to experience the potential of FreeSWITCH™.

Shutdown FreeSWITCH™

Issue the following command in the FreeSWITCH™ Terminal window:

  shutdown
  • No labels